Brand New opened box item. Contents are safe and secure! Absolutely pristine and untouched on the interior level!
Intel Omni-Path Edge Switch 100 Series switch 48 ports managed 100SWE48QF2
Please Note: Brand New opened box item. Contents are safe and secure! Absolutely pristine and untouched on the interior level!
The next generation of high performance computing (HPC) fabrics use Intel Omni-Path Architecture to create fabrics that meet the needs of the most demanding set of applications. The Intel Omni-Path Edge Switch can be combined with other edge switches and directors to build much larger multitier fabrics. This Intel Omni-Path Edge Switch delivers an exceptional set of high-speed networking features and functions.
Expansion / Connectivity: 48 x 100Gbit LAN QSFP
Power: Internal power supply - hot-plug
Miscellaneous: Reversible fan module, management module
Dimensions & Weight: 1.7 in
High message rate throughput
Intel Omni-Path Architecture is designed to support high message rate traffic from each node through the fabric. With ever-increasing processing power and core counts in Intel Xeon and Intel Xeon Phi processors, that means the fabric has to support high bandwidth as well as high message rate throughput.
Features in Intel OPA will help minimize the negative performance impacts of large Maximum Transfer Units (MTUs) on small messages and help maintain consistent latency for interprocess communication (IPC) messages, such as Message Passing Interface (MPI) messages, when large messages - typically storage - are being simultaneously transmitted in the fabric. This will allow Intel OPA to bypass lower priority large packets to allow higher priority small packets, creating a low and more predictable latency through the fabric.
Enhanced end-to-end reliability
Intel Omni-Path Architecture will also deliver efficient detection and error correction, which is expected to be much more efficient then forward error correction (FEC) defined in the InfiniBand standard. Enhancements include zero load for detection, and if a correction is required, packets only need to be retransmitted from the last link - not all the way from the sending node - which enables near zero additional latency for a correction.
Device Type Switch - 48 ports - managed
Enclosure Type Rack-mountable 1U
Subtype 100 Gigabit Ethernet
Ports 48 x QSFP
Performance Aggregate bandwidth: 1.2 Tbps
Status Indicators Port status, power, Internet
Expansion / Connectivity
Interfaces 48 x 100Gbit LAN QSFP
Power Device Internal power supply - hot-plug
Installed Qty 2 (installed) / 2 (max)
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V (50/60 Hz)
Features Front-to-rear airﬂow
Included Accessories Reversible fan module, management module
Compliant Standards BSMI CNS 13438 Class A, EN55024, CISPR 22, UL 60950-1, IEC 60950-1, REACH, CSA C22.1, FCC Part 15 B Class A, VCCI Class A, KN22, KN24, AS/NZS CISPR 22, RoHS 2011/65/EU, RRA Class A, GOST-R 51317.3.2, GOST-R 51317.3.3, EN61000-3-2, EN61000-3-3, CAN ICES-3 Class A, CISPR32/EN55032, GOST-R 51318.22, GOST 30805.24
Dimensions & Weight
Width 1.7 in
Depth 16.8 in
Height 17.3 in
Weight 14.77 lbs
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 - 85% (non-condensing)
Min Storage Temperature -40 °F
Max Storage Temperature 158 °F
Humidity Range Storage 5 - 95% (non-condensing)