1

Your cart is empty.

614-732-4868

Product Image Lubrizol Estane® 3D TPU M95A-545 OR UV 3DTW0300 160kg/300L 3D Printing
Sale

Lubrizol Estane® 3D TPU M95A-545 OR UV 3DTW0300 160kg/300L 3D Printing

$ 2,095.99 $ 8,999.99

Quantity

1

Used

As Is item, minor sign of box damage. Damage to box has affected two seals - two seals have small cracks and separation from bag - Small amount of material loss. All lids and seals have been screwed off/opened - please see photos. The majority of the material is safe and secure! No returns. Ships via freight on pallet.

3DTW0300

Lubrizol Estane® 3D TPU M95A-545 OR UV 3DTW0300

Please Note: As Is item, minor sign of box damage. Affected two seals - two seals have small cracks and separation from bag - Small amount of material loss. All lids and seals have been screwed off/opened - please see photos. The majority of the material is safe and secure! No returns. Ships via freight on pallet.

ESTANE® 3D thermoplastic polyurethane (TPU) can be offered in pellet form for filament extrusion purposes and is in development to be offered in powder TPU to meet strict market requirements for 3D printed parts, such as high strength and high abrasion resistance, high mechanical properties and outstanding surface/haptic properties.

Type: Polyether Thermoplastic Polyurethane (TPU)
Uses: HP Multi-Jet Fusion (MJF)

Physical Properties Value (Metric) Unit Test Method
Specific Gravity 1.17 ASTM D-792
Melting Temperature (by DSC) 200 °C Lubrizol DSC

Multi-Jet Fusion Printed Part Information:
 ESTANE® 3D TPU M95A is certified for skin sensitization and cytotoxicity.
Physical Properties Value (Metric) Unit Test Method
Vicat Softening Temperature 161 °C ASTM D-1525 (10N)
Ross Flex Test at 23°C No Crack 60° for 150,000 cycles
Ross Flex Test at -6°C No Crack 60° for 150,000 cycles


Mechanical Properties
Full Print Bed Build Half Print Bed Build
Unit Test Method
100% Fresh Powder (Generation 5)
Specific Gravity 1.10 - 1.15 ASTM D-792
Properties in X
Hardness (5 sec) 93 ± 3 Shore A ASTM D-2240
Abrasion Volume Loss 100 (140) 80 (100) mm3
DIN-53516 / ISO-4649
Tensile Strength 17 (11) 18 (14) MPa DIN-53504 / ISO-37
Elongation at Break 400 (180) 430 (340) % DIN-53504 / ISO-37
Tear Strength (Die C) 80 (80) 95 (96) KN/m ASTM D-624
Flexural Modulus 85 MPa ASTM D-790
Properties in Z
Hardness (5 sec) 93 ± 3 Shore A ASTM D-2240
Abrasion Volume Loss 90 (120) 80 (100) mm3
DIN-53516 / ISO-4649
Tensile Strength 8 (5) 8 (6) MPa DIN-53504 / ISO-37
Elongation at Break 90 (30) 110 (70) % DIN-53504 / ISO-37
Tear Strength (Die C) 35 (33) 45 (44) KN/m ASTM D-624


Dimensional Properties
Dimensional Accuracy in XY +/- 1.0 mm


Application Example: MJF Printed Lattice Structure
• This geometry is designed to provide physical properties of general lattice structure (as shown).
• Properties of lattice parts may vary depending on part design.
• These values should only be taken as exemplary properties of lattice structure printed by ESTANE®
3D TPU M95A-545 OR UV, should not/cannot be applied for specification
purposes and do not constitute any agreed contractual specification/quality of ESTANE® 3D TPU M95A-545 OR UV.
Reclaimed Powder Information:
• Standard refresh rate of ESTANE® 3D TPU M95A-545 OR UV is 80% reclaimed and 20% virgin.
• As the powder blend is reclaimed for more printing cycles, the yellowness of the powder blend increases.
• The print mode assumes a high reclaim rate as the blend has been tested up to 10th generation.
• Powder yellowness values can vary significantly depending on measurement location, print bed density and part types.
Design Characteristics Value Unit
Outside Diameter 50 mm
Lattice element diameter 1.5 mm
Center to Center distance 4 mm
Solid plate thickness 2 mm

Physical Properties of Printed Part
80% Reclaimed / 20% Virgin Powder Blend
Test Method
Value Unit
Properties in XY
Vertical Resiliency 52 % ASTM D-2632
Swing-arm Resiliency 55 % DIN-53512
Compression Set at Room Temp 18 % 50% Deflection for 6 hrs
Compression Set at 50 °C 30 % 50% Deflection for 6 hrs
Properties in Z
Vertical Resiliency 53 % ASTM D-2632
Swing-arm Resiliency 57 % DIN 53512
Compression Set at Room Temp 17 % 50% Deflection for 6 hrs
Compression Set at 50 °C 19 % 50% Deflection for 6 hrs


Reclaimed Powder Information:
• Standard refresh rate of ESTANE® 3D TPU M95A-545 OR UV is 80% reclaimed and 20% virgin.
• As the powder blend is reclaimed for more printing cycles, the yellowness of the powder blend increases.
• The print mode assumes a high reclaim rate as the blend has been tested up to 10th generation.