1

Your cart is empty.

.

Product Image Silicom PE210G2SPI9 Dual Port 10 Gigabit Ethernet PCI Express Server Adapter
Sale

Silicom PE210G2SPI9 Dual Port 10 Gigabit Ethernet PCI Express Server Adapter

$ 249.99 $ 504.99

Quantity

1

New

PE210G2SP19-SR

Silicom PE210G2SPI9 Dual Port 10 Gigabit Ethernet PCI Express Server Adapter

Brand New Sealed item

Silicom’s SFP+ 10 Gigabit Ethernet PCI Express server adapters are designed for Servers and high-end appliances. The Silicom 10 Gigabit Ethernet PCI Express Server adapters offer simple integration into any PCI Express X8 to 10 Gigabit Networks.

Specifications

SFP+ (Small Form Factor Pluggable) supports: SFI interfaces supports 10GBase-R PCS and 10 Gigabit PMA in order to connect with SFP+ to 10GBase-SR / 10GBase-LR and SFP+ Direct Attach
10GBase-SR SFP+:
IEEE Standard / Network topology: Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)
10GBase-SR SFP+:
Data Transfer Rate: 10.3125GBd
10GBase-SR SFP+:
Cables and Operating distance Up to: 62.5um, 160MHz/Km 26m
62.5um, (OM1)200MHz/Km 33m
50um, 400MHz/Km 66m
50um, (OM2)500 MHz/Km 82m
50um, (OM3)2000MHz/Km 300m
10GBase-LR SFP+:
IEEE Standard / Network topology: Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)
10GBase-LR SFP+:
Data Transfer Rate: 10.3125GBd
10GBase-LR SFP+:
Cables and Operating distance Up to: Single-Mode: 10000m at 9um
10GSFP+Cu :
IEEE Standard / Network topology: Copper 10Gigabit Ethernet, 10GSFP+Cu (Direct Attach)
Fiber 10GBASE-SR Ethernet Technical Specifications:
Output Transmit Power: Typical: -2.33 dBm
Minimum: -2.8 dBm
Optical Receive Sensitivity: Typical: -13.45 dBm
Maximum: -11.1 dBm
Maximum Input Power:
Maximum: +0.5dBm
Fiber 10GBASE-LR Ethernet Technical Specifications:
Output Transmit Power: Typical: -2.75 dBm
Minimum: -8.2 dBm
Optical Receive Sensitivity:
Typical: -14.65 dBm
Maximum: -12.6 dBm
Maximum Input Power:
Maximum: +0.5dBm
Operating Systems Support
Operating system support: Windows
Linux
FreeBSD
VMware
General Technical Specifications
Interface Standard: PCI-Express Base Specification Revision 2.0 (5 GT/sec)
Board Size: Low profile add-in card: 167.65mm X 68.91mm (6.60”X 2.713”)
PCI Express Card Type: X8 Lane
PCI Express Voltage: +12V +- 8%
PCI Connector: X8 Lane
Controller: Intel 82599ES
Holder: Metal Bracket
Weight: 150 gr ( 5.29 oz )
Power Consumption: 5.88 W 0.49 A at 12V: Typical, 10GBASE-SR transceivers are installed in all ports; all ports operate at 10Gb/s.
6.12 W 0.51 A at 12V: Typical, 10GBASE-LR transceivers are installed in all ports; all ports operate at 10Gb/s.
4.68 W 0.39 A at 12V: Typical, SFP+ direct attach Copper Cables are installed in all ports; all ports operate at 10Gb/s.
6.12 W 0.51A at 12V: Typical, 10GBASE-LR transceivers are installed in all ports, No link at all ports
4.44 W 0.27A at 12V: Typical No SFP+
Operating Humidity: 0%–90%, non-condensing
Operating Temperature: 0°C – 50°C (32°F – 122°F)
Storage: -40°C–65°C (-40°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF*: 66 (Years)
* The prediction was performed for 40°C Ambient temperature, GB Environmental condition.
The reliability prediction was performed in accordance with Telcordia SR-332
LEDs
LEDs: LED per port
Link /ACT : Turns on link , blinks on activity (green)
LEDs location: LED is located on the PCB, visible via holes in the metal bracket holder
Connectors: (2) SFP+ cage